Model 2106
The 2106 is designed to easily insert into piping between ASME/ANSI flanges. This valve operates similar to a check valve in one direction to open up as the flow increases through the valve and shut-off in the other direction when excess flow occurs. This valve is capable of lower shut off flows than the model 2105. Closing flow rates are factory preset to customer specifications.
See tables below for dimensions of common sizes.
| Nominal Size | A Width | B Diameter | C Insert Diameter |
|---|---|---|---|
| 0.75" | 0.625" | 1.69" | 0.70" |
| 1 | 0.625 | 2.00 | 0.90 |
| 1.5 | 0.625 | 2.88 | 1.50 |
| 2 | 0.625 | 3.62 | 1.90 |
| 3 | 0.75 | 5.00 | 2.88 |
| 4 | 0.75 | 6.19 | 3.75 |
| 6 | 1.00 | 8.50 | 5.69 |
| 8 | 1.00 | 10.62 | 7.50 |
| 10 | 1.25 | 12.75 | 9.63 |
| 12 | 1.30 | 15.00 | 11.50 |
| 14 | 1.50 | 16.25 | 12.88 |
*Custom CVs upon request.
Valves are custom-engineered and the dimensions provided above are for reference only. Sizes displayed are in inches. Closing flow rates are factory preset per customer requirements.